Summer Infant Crib Rail: Safe and Sleep for Your Little One

A summer infant crib rail is a device that is placed on the side of a crib to prevent a baby from falling out. It is usually made of metal or plastic and has either a mesh or solid bottom. The rail typically extends from the top of the mattress to just below the level of the baby’s chest.

If you’re looking for a safe and reliable way to keep your little one from falling out of their crib, then you’ll want to check out the Summer Infant Crib Rail. This product is designed to fit most standard sized cribs, and it’s easy to install, so you can have peace of mind knowing that your child is safe and sound.

Summer Single Bedrail White

Summer Infant Bed Rail Instructions

The Summer Infant Bed Rail is a product designed to help parents keep their children safe while they sleep. The rail is made of durable metal and plastic, and it attaches to the side of the bed with Velcro strips. It comes in two sizes: small (for babies up to 18 months) and large (for toddlers up to three years).

The rail can be used on both twin and full-size beds. To install the rail, first remove the mattress from the bed. Then, position the rail against the side of the bed, making sure that the plastic feet are touching the floor.

Use the included screws to secure the rail to the bed frame. Once the rail is installed, you can put the mattress back on top of it. To use the rail, simply place your child in their bed as usual and tuck them in.

Then, lowerthe rail down so that it is touchingthe mattress. Your child will be able to move freely around their bed without falling out. When you’re ready to take downthe rail, just liftit up and off ofthe bed.

The whole process takes less than five minutes!

Summer Infant Bed Rail Recall

On July 9th, Summer Infant announced a recall of their Portable Bed Rails due to a fall hazard. The rails can collapse unexpectedly, posing a risk of injury to the child. Approximately 56,000 units are affected by this recall.

If you have purchased one of these bed rails, you should stop using it immediately and contact Summer Infant for a refund. You can reach them at 1-800-426-8627 or online at www.summerinfant.com/recall . This recall is especially important to pay attention to because bed rails are often used for children who are already at a higher risk for injury (due to developmental delays, etc).

Be sure to keep your child safe and take advantage of this refund opportunity if you have been affected by this recall.

Summer Bed Rail Instructions Video

Looking for a way to keep your little one safe and sound during the summer months? Look no further than the summer bed rail. This product is designed to fit most bed sizes and provides a barrier between your child and the floor, preventing them from rolling out of bed.

The summer bed rail is easy to install and comes with full instructions. To ensure that your child is safe and secure, follow these simple steps:

1) Position the bed rail at the edge of the mattress, making sure that it is flush against the side of the bed.

2) Use the included straps to secure the rail to the bed frame.

3) Test the rail by moving it back and forth to make sure that it is secure.

4) That’s it! Your child can now sleep soundly knowing that they are safely tucked in for the night.

Summer Infant Bed Rail How to Install

If you have a young child who is transitioning to a “big kid bed,” you may be considering purchasing a bed rail. Bed rails can help prevent your child from falling out of bed and injuring themselves. Summer Infant makes a variety of bed rails that are easy to install and use.

In this blog post, we will provide detailed instructions on how to install a Summer Infant bed rail. The first step is to gather the tools and materials you will need for the installation. You will need a measuring tape, a drill, screws, and wall plugs.

The next step is to measure the width of your mattress. Once you have determined the width of your mattress, mark the center point on both sides of the bed frame with a pencil. These marks will be where you will drill holes for the screws that will secure the bed rail to the frame.

Now it’s time to start drilling! Drill pilot holes at each mark that you make on the frame. Be sure not to drill all the way through the frame

– you just want to create a small hole for the screw to go into. Once you have drilled pilot holes on both sides of the frame, it’s time to attach the brackets that came with your bed rail kit. There should be 4 brackets in total

– 2 long ones and 2 short ones. The long brackets should be attached at each end ofthe bed rail, whilethe shortbrackets should be placed in between them (at approximately 2 feet intervals).

Secure each bracket with 2 screws apiece using your drill. Now it’s time to move onto installing the actual bed rail itself! Take the middle section of the rail and line it up with the center marks you made on both side of the frame earlier.
Once you have thes rail in position use the two end pieces of the rail to attach it to the frame by lining them up with the pre-drilled holes on your frame and securing with screws. You may need to make two additional holes in the center section of the bed rail in order to secure it properly to your frame just make sure to mark where you will need to drill before hand so you avoid damaging any parts of the bed. 

Summer Infant Bed Rail Double

If you have young children, you know how important it is to keep them safe while they sleep. That’s why Summer Infant makes the Bed Rail Double, a product that helps prevent your child from falling out of bed. This rail is designed for use with twin beds, and it features two rails that can be adjusted to fit the width of your bed.

The Bed Rail Double also includes a travel bag so you can take it with you when you travel.

Summer Infant Double Bed Rail Instructions

If you’re looking for ways to keep your little one safe and secure while they sleep, summer infant double bed rails are a great option. Here’s everything you need to know about how to use them. Most importantly, always follow the manufacturer’s instructions when installing or using any type of bed rail.

Summer Infant Double Bed Rail Instructions

1. Start by attaching the side brackets to the bed frame using the provided hardware. Make sure that the brackets are securely in place before proceeding.

2. Next, insert the vertical posts into the side brackets. Again, make sure that everything is secure before moving on.

3. Now it’s time to install the top rail. First, attach the bracket clamps to the top rail using the included hardware. Then, position the top rail on top of the vertical posts and secure it in place with the bracket clamps.

4. Finally, attach the safety strap to one of the lower vertical posts and adjust it so that it’s snug againstthe mattress (do not fasten it too tightly).

Summer Infant Single Bed Rail Instructions

If you’re looking for a bed rail to help keep your little one safe and sound during the night, the Summer Infant Single Bed Rail is a great option. This bed rail is designed for use with twin beds, and it’s easy to install and remove as needed. Here’s everything you need to know about using the Summer Infant Single Bed Rail in your home.

The Summer Infant Single Bed Rail is designed for use with twin beds. It’s made of durable steel tubing and features an adjustable height setting to accommodate different mattress thicknesses. The bed rail also has a safety strap that attaches to the mattress for added security.

To install the bed rail, simply place it against the side of the bed where you want it to go. Then, use the included hardware to secure it in place. Once installed, the bed rail should sit just above the mattress so that your little one can’t slip underneath it.

To remove the bed rail when not in use, simply unscrew the hardware and lift up on the release levers located on either side of the rail. The bed rail will then fold down flat for easy storage. The Summer Infant Single Bed Rail is a great way to keep your little one safe during sleep time.

It’s easy to install and remove, and it’s adjustable to fit most twin beds.

Summer Infant Out of Sight Bed Rail

Summer Infant Out of Sight Bed Rail is an extra long bed rail that helps keep your child safe and secure while they sleep. It’s perfect for use with twin or full size beds, and it can be used with a mattress up to 18 inches thick. The bed rail is made from sturdy steel tubing, and it features a mesh panel that helps keep your child from falling out of bed.

It’s easy to assemble and install, and it comes with all the necessary hardware.

Credit: www.ebay.com

What Alternatives Can Be Used Instead of Bed Rails?

Most people think of bed rails as those metal bars that can be attached to the sides of a bed. However, there are many other types of bed rails that can be used to provide support and safety for individuals who have difficulty getting in and out of bed or who need extra support while sleeping. One alternative to traditional bed rails is a set of low-profile rails that sit close to the mattress.

These rails can provide enough support for someone who needs help getting in and out of bed, but they don’t stick up as high, making them less likely to get caught on clothing or linens. Another option is a set of inflatable bed rails. These look like regular bed rails, but they’re made from an air-filled material that makes them much softer and less likely to cause injury if someone falls against them.

They can also be deflated when not in use, making them more convenient than traditional bed rails. If you’re looking for something even more low-profile, consider using tape or Velcro strips to create makeshift “rails” on the side of the mattress. This won’t provide as much support as actual bed railings, but it can give you some peace of mind if you’re worried about your loved one falling out of bed during the night.

No matter what type of alternative you choose, make sure you consult with a medical professional before making any changes to your loved one’s sleep setup. With the right precautions in place, everyone can sleep soundly and safely!

How Do You Install a Double Bed Rail for a Summer Baby?

If you’re looking for an extra measure of safety for your little one, installing a double bed rail is a great option. Here’s how to do it:

1. Start by measuring the width of your bed. You’ll need to purchase a bed rail that is at least as wide as your bed, so that it can provide adequate coverage.

2. Once you have the right size bed rail, position it at the head of the bed so that it extends from the mattress to the floor. Make sure that the side of the rail with the warning label is facing up.

3. Using screws or bolts (depending on what type of hardware is included with your bed rail), secure the rail to both the headboard and footboard of the bed. Be sure to follow all instructions carefully, and use caution when working with tools.

4. Test out the stability of the bed rail by gently pressing down on it in various places. It should be securely attached and not move around when pressure is applied.

Can You Put a Bed Rail on a Crib?

There are a few things to consider when deciding whether or not to put a bed rail on a crib. The first is the age of your child- if they are under two years old, it is generally recommended that you do not use a bed rail. This is because there is an increased risk of entrapment and suffocation for younger children.

If your child is over two years old and you feel comfortable using a bed rail, there are still some safety concerns to keep in mind. Make sure that the bed rail you choose fits snugly against the mattress and cannot be pulled away from it. Also, ensure that there are no gaps between the mattress and the bed rail where your child could become stuck.

Finally, always use caution when folding down or removing the bed rail- never leave it unattended while in use.

Are Baby Guard Rails Safe?

Yes, baby guard rails are safe when used as directed. When installed correctly, they can help prevent serious injuries by keeping your little one from rolling out of bed. Be sure to follow the manufacturer’s instructions carefully and check for any recalls before using a guard rail.

Conclusion

The Summer Infant Crib Rail is a safe and easy way to keep your baby from rolling out of their crib. It is adjustable to fit most standard size cribs, and has a padded foam grip that is comfortable for your baby to hold onto. The rail also features a mesh pocket that is perfect for storing toys or pacifiers.