1. Assemble the Summer Infant Bed Rail following the instructions provided with your purchase. Be sure to tighten all screws and bolts securely.
2. Place the bed rail on its side near one of the sides of the bed, making sure that it is parallel to the mattress’s edge and centered between the headboard and footboard if applicable.
3. Slide a mattress support board (included) between both box springs or slats, aligning each end with either side of your bed frame’s support structure where you plan on installing your Summer Infant Bed Rail. Securely fasten them in place using screws or nails as needed based on your particular bed frame setup; use caution when driving any type of fastener into wood surfaces so not to damage them beyond repair during assembly process
4. Lift up your Summer Infant Bed Rail until it can rest against top rung/edge of bottom portion of headboard/footboard area then lower down gently onto mattress support board for secure fitment in place – this should be done for both ends simultaneously ensuring equal placement heights left & right side(s).
5. Make adjustments as necessary by tightening all connectors until firmly secured – this includes any straps that may have come with product installation kit (if included). Your Summer infant Bed Rail should now be safely installed and ready for first-time use!
- Step 1: Read the Instructions – Before attempting to install the Summer Infant Bed Rail, it is important to read and understand all of the instructions that come with it. This will help ensure that everything goes smoothly during installation.
- Step 2: Assemble Parts – Gather any necessary parts for assembly such as screws and bolts. Put these items in a safe place so that they do not get lost or misplaced during installation.
- Step 3: Place Rail – Place the rail at one end of your bed frame, making sure that it is level with the mattress. Securely fasten it using screws or bolts where indicated in the instructions provided by Summer Infant.
- Step 4: Attach Straps – There should be straps included with your bed rail kit which you can use to attach securely to your bed frame on both sides of the rail itself. These are designed to keep your child from falling out while sleeping or playing on top of their bedrail-protected bedframe.
- Step 5: Test Installation – Once you have completed installation, test out your work by pushing down firmly on each side of the railing and ensuring that there are no weak spots or gaps between them and their respective sides of the frame.
Summer Infant Folding Double Bed Rail Instructions
The Summer Infant Folding Double Bed Rail is a great way to keep your little one safe and secure while they sleep. To install the bed rail, use the included instructions that are easy to follow. Start by unfolding the bed rail and placing it onto your mattress so that it covers both sides of the mattress edge.
Next, attach each end of the bed rail to your box spring using two screws on each side (screws not included). Finally, tuck in any excess material around edges for a secure fit and you’re ready for sweet dreams!
Summer Bed Rail Instructions Video
If you’re looking for a quick and easy way to install your summer bed rail, check out this helpful instructions video! It gives detailed step-by-step instructions on how to assemble the bed rail and attach it securely to the mattress. From unpacking the components and connecting them together, to tightening all of the screws and testing its strength, this video will guide you through every step so that your child’s safety is ensured.
Watch it today to get started on installing your summer bed rail!
Summer Infant Single Bed Rail Instructions
The Summer Infant Single Bed Rail provides parents with peace of mind that their little one will stay safe while sleeping. Its simple design and easy installation make it a great choice for any home. To install the bed rail, first place the lower end of the rail onto the mattress edge closest to you and use your foot to press down on the locking lever at its base until it securely locks into place.
Next, adjust both sides so they fit snugly against both sides of the mattress before securing them in place using plastic brackets provided with purchase. Finally, slide up each side until you hear an audible click which indicates that it is locked in position and ready for use.
Summer Grow With Me Bed Rail
The Summer Grow With Me Bed Rail is an essential item for any parent of a toddler transitioning from a crib to a bed. This adjustable and secure rail allows your child to sleep safely in their new bed, with the ability to adjust it as they grow older. It’s easy to install and provides added peace of mind that your little one won’t fall out during those long summer nights!
Summer Infant Bed Rail Recall
In May 2020, Summer Infant issued a recall of its Bed Rails due to reports of the rails collapsing unexpectedly. Approximately 10,000 units sold in the United States and Canada were affected by this recall. Consumers are advised to immediately stop using these bed rails and contact Summer Infant for a free repair kit that includes replacement parts and instructions on how to properly install them.
Credit: www.madeformums.com
How Do You Install a Baby Bed Rail?
Installing a baby bed rail is an important step in ensuring the safety of your little one as they transition to sleeping in their own bed. The process is relatively simple and should only take around 20 minutes or so. First, you will need to measure the mattress length and width for correct size ordering.
Next, gather all of your necessary tools – drill with appropriate bits; screwdriver; pliers and screws/bolts (the exact type depends on the model). Place the rail onto the mattress perpendicularly to make sure it fits before drilling any holes into your frame. Once you have drilled pilot holes into both sides of the frame, securely attach rails using bolts or screws as instructed by manufacturer’s instructions.
Finally, test out each connection point for stability before leaving your child unattended in their bed with this new addition! By following these steps carefully when installing a baby bed rail, you can rest assured knowing that your little one will be safe while sleeping.
How to Install Homesafe by Summer Bed Rail?
Installing the HomeSafe by Summer bed rail is a simple and straightforward process. First, you will need to measure the size of your mattress so that you can determine which height extension kit (if any) will be needed for installation. Once you have determined this, assemble the bed rail using the provided instructions and hardware.
Make sure all parts are securely fastened before moving on to the next step. Next, place the bed rail in its desired location along one side of your mattress with the top-most part facing up towards you. Securely attach it to your frame or headboard using either screws or adhesive strips depending on what type of material they are made out of.
Finally, insert any additional extension kits if necessary and latch them onto either side of your frame or headboard as well as around each post at both ends of your bedrail so that it is firmly secured in place once complete! With these few easy steps, you’ll have successfully installed HomeSafe by Summer Bed Rail for added security and peace-of-mind when sleeping soundly each night!
How Do You Attach Bed Rails to a Frame?
Attaching bed rails to a frame is a relatively straightforward task, but it’s important to do it properly so that the bed rail stays securely in place. First, you’ll need to measure the length and width of your frame. Once you’ve determined these measurements, use them to purchase the appropriate size and type of bed rail for your frame.
When purchasing your bed rails, make sure they are made from sturdy materials such as metal or wood. Next, locate the two long side rails on either end of the frame; these are usually located between the headboard and footboard. Take one of your new bed rails and align it with one of the long side rails on your frame; secure this rail in place using screws or bolts depending on what kind of fasteners are compatible with your particular frame model.
Repeat this process for the other side rail before moving onto attaching any remaining short cross bars which will offer additional support for mattresses or box springs that may be placed atop them. With all components firmly secured into place, you’re now ready to safely enjoy sleeping upon an attached set of sturdy and reliable bed rails!
What is the Proper Placement of a Bed Rail?
When it comes to proper placement of a bed rail, safety should always be the top priority. Bed rails are designed to provide support and stability for individuals who may have difficulty getting in or out of bed due to age or health conditions. To ensure that your bed rail is properly placed, you’ll want to make sure that it’s installed at the height of the mattress so that it provides adequate support without being too high off the ground.
Additionally, you’ll want to make sure that there is enough space between the rail and headboard so as not to interfere with any other furniture pieces in the room. Finally, you’ll also want to check periodically throughout its use that all screws are tightened securely and no parts are loose or missing. Taking these steps will help ensure safe usage of your bed rail and prevent any falls or injury caused by improper installation.
Summer Single Bedrail White
Conclusion
Installing a Summer Infant Bed Rail is an easy and effective way to ensure that your little one will stay safe in their bed. All you need to do is follow the simple instructions, measure properly, and make sure that all parts are securely fastened. With this bed rail installed, parents can have peace of mind knowing their child’s safety is taken care of.
So go ahead and give it a try – you won’t regret it!
Leave a Reply